GSM and BT Silent wireless panic buttons - alarm system
Protect yourself, your employees and your family with our GSM Silent Panic
Button system.
By hiding wireless panic buttons around your home or business
premises, there is no need for wires and they can be located in easy to find
places. This system is completely independent of any existing alarm system and
can not generate a false alarm as it can only be activated by physically pushing
a button.
Places they can be hidden
- in the safe
- in the bedroom
- under the bed
- in a drawer
- in a wardrobe
- in the lounge under a table
- in the study
- by the front & back door
- in a kitchen cupboard
Are just some of the places they can be put. Don't forget, the
more you have, the easier it is to get to push one.
Once pushed a silent call is
made to a monitoring station, neighbour, colleague or family member.
| How it works? |
By
discreetly hiding buttons around the house or business premises and
letting only the people that need to know where they are, the system
will monitor all the wireless panic buttons for activation.
Once activated, the system will then call up to 5 or
6 phone numbers to alert them of a problem.
The BT version cuts off the internal phones while
it is communicating to prevent anyone picking up the phone and over
hearing the outgoing message.
|
| Why Silent? |
It is a known fact fact
that people get hurt once an intruder or gang realise someone has
initiated a panic system.
This system has no sirens or alarms and makes
silent phone calls alerting others off the
premises that a panic situation has arisen.
This means that the monitoring centre or someone outside the
situation can raise the alarm with the Police and authorities who
can then respond accordingly.
|
| Can this system be used and an intruder alarm? |
No.
The reason for this is a standard intruder alarm is
at risk of 'cry wolf' syndrome by being falsely activated by PIRs,
door contacts and movement sensors.
This system is solely to let others
know that you are under attack or in a hostage situation. The only
way this system can be triggered is by pressing a Panic Button
located in hidden places around the premises.
Once activated it will give a specific recorded
message informing called numbers that the alarm is a 'Panic Alarm'
and to be responded to immediately.
We can supply a separate alarm system if required
to protect your property from burglary.
|
| Why GSM? |
GSM uses mobile phone
technology. This means that should an
intruder or gang cut the phone lines prior to entry to your premises
the alarm will still reach its destination.
There are no phone wires to cut and a call is guaranteed
to get through without the expense of Red-Care from BT. |
| What happens when the
unit is triggered? |
The GSM unit prior to
making calls, will send a pre-formatted text message to indicate to
the receiver which system has been triggered. The message can read
'Panic Alarm System activated at.....'. Once text messages have been
sent, the unit will then continue to make phone calls until someone
deactivates it via phone call. The BT system
will make calls until it has been deactivated.
|
Prevent car-jacking at your gates.
If is also a fact that more and more car-jacking's
are happening outside gates while waiting for them to open. How many times
have you seen a 'star' surrounded by paparazzi while waiting for gates to
open. Reduce this risk by installing a
GSM-Gate-Opener which means you
can take control of your gates with your mobile phone. No more waiting until
you are close enough for key-fobs to work & even worse having to leave the
safety of your vehicle to push in the key-code number on the gate.
-
| 
