|
| |
GSM asset alarm & monitoring systems
|
Monitor Light
|
|
|
The main characteristics of the device: 4 zone
transmitting device with built-in GSM communicator Signalling to
monitoring station (Contact-ID) Sending SMS to each event with
separately adjustable text 4 telephone numbers for the alarm calls and
SMS 2 telephone numbers for Contact ID signals Distinguishing event and
restore on the zone inputs Arming/disarming by telephone, enquiry on
state, relay control Power control, it signals to the monitoring
station/owner in case of decreasing voltage Enclosed Pager Remoter
program for PC for the functions as follows o Programming the module on
serial port or by remote download o Complete remote diagnostics,
monitoring inputs and outputs, battery voltage Technical information:
Power supply: 12V DC Maximum power consumption: 500 mA Operating
temperature: -20°C .. +60°C Size: 70x100mm Accessories: GSM antenna
(900/1800 MHz) Inputs: 4 pcs of contact inputs Installation methods:
Short-circuit activated Activated by circuit opening Outputs: 2 pcs of
relay outputs (independent, closing/opening) Program connector: RS-232
serial connector for PC programming GSM transmitting device:
SONY-ERICSSON GM47-R5 industrial GSM module |
|
|
|
Monitor PRO |
|
|
The main characteristics of the device
12/24 zone multifunctional alarm system with built in
GSM communicator handling two independent partitions that can also be
armed/disarmed from an independent external device storing 576 events
with date and time LCD keypad with transparent menu system, easy and
quick to program Telephone calls with recordable voice messages (12
pieces of 5 second-long messages) Sending SMS messages with user and
zone identification (e.g. OPENING THE SHOP: THOMAS ) Signalling to
monitoring station (CONTACT-ID) Differentiating 47 kinds of events 4
telephone numbers for the alarm calls and SMS 2 telephone numbers for
Contact ID signals Handling 12 users (12 user codes with 4 – 6 digits)
Arming/disarming by telephone, enquiry on state, relay control and voice
recording Free Ultimate Remoter program for PC for the functions as
follows Programming the module on serial port or by remote download
Complete remote diagnostics, power supply, battery
voltage, over current monitoring, control of zones and outputs, event
memory. Technical information Power supply: 16V-18V / 50Hz AC Average
power consumption: 200mA Operational temperature: 0-60 °C Size: 202x124
mm Accessories: GSM antenna (900/1800 MHZ) + cable Plastic fixing mounts
(4 pcs) Accumulator cable 1k Ohm resistor (40 pcs) Proposed external
elements: Transformer: 16V / 40 VA Accumulator: 12V / 7Ah Keypad /
programmer: SATEL CA 64 LCD (maximum 8 pcs) Inputs: 12 zones, maximum 24
sensors Installation methods (can be chosen by each zone) Short circuit
activated Activated by circuit opening DEOL: closed by resistor
(monitoring sabotage) 1 or 2 sensors / zone 2 inputs (A,B) for
activation or deactivation with DEOL closure 1 analogue voltage input
(reserved) Outputs: Keypad power supply (+KPD): 12V~0.5A DC Sensor power
supply (+12 V): 12V~0.5A DC OUT1 (internal signalling device): 12V~1A DC
OUT2 (external signalling device): 12V~1A DC RELAY1 (independent, NO/NC)
RELAY2 (independent, NO/NC) RELAY3 (independent, NO/NC) Program
connector RS–232 serial connector for PC programming GSM transmitting
device SONY – ERICSSON GM47-R5 industrial GSM module Charging of
accumulator Cyclical, voltage controlled charge, max. 800mA charging
current
|
|
|
Easy installation
As the product operates on wireless technology, install could not be more
simple. Door contacts, PIR detectors, smoke sensors and equipment and plant can
be monitored.
Auto-dial technology
Once programmed with your selected home or mobile phone numbers the system
will alert you automatically in the event of an emergency. There is no need for
a landline as the unit contains a mobile phone transmitter unit. The system also
allows you to listen in to your property to verify if the alarm is genuine.
24 hour / 365 days a year protection at the press of a button
Setting or deactivating the alarm could not be easier. Simply press the
wireless key fob just like the devices provided with car alarms. You may also
use your mobile phone to activate / deactivate your UB480 alarm system
No wires / Wires—The choice is yours
Our system offers complete flexibility. If you do not want the hassle of
running wires around your property then simply install the wireless detectors
supplied. However if you require the comfort of traditional methods then simply
wire your chosen products to the terminal block on the UB-480.
Main Features
- Simple and quick installation.
- No phone line required, simply insert the GSM SIM card provided into the
control panel.
- Easy operation and programming.
- Programme up to 5 telephone numbers (mobile or landline) to receive
alert messages
- Built in battery back-up allows the system to operate without mains
power
- Additional detectors can easily be added to the system
- System can be operated by mobile telephone text message from anywhere in
the world, allowing activation, interrogation and deactivation.
- All systems are configured to your requirements.
- Bespoke systems can be configured to meet your individual security
needs.
Want to know more or not what you are looking for?
please fill in your details below and we will find the information you
request:
|
|
