GSM M10 Modules & Solutions
GSM Secure offer a number of solutions to get your GSM project or product off the ground.
Firstly, we offer GSM Modules and development and evaluation kits to allow you to test, try and build your first prototype. These are small package GSM devices which are built directly into your project to GSM enable them.
Secondly, we have the GSM Carrier Board (GSM-CB1) which allows a very fast route to market solution for GSM Enabling your project.
We have done the hard work for you in designing a 'Pin out' solution, on board power regulation onto a single board which can be plugged together with the main board (your project) to give you a ready to go solution to GSM.
By designing your board to accomodate the Pin connections of the GSM-CB1, half of your design & manufacturing problems are solved, drawings, specification and technical information is available on request.
Please note the difference in part numbers, the 300 means Tri Band and 340 is Quad band.
|
|
|
|
|
|
|
Pricing:
M10
1x £26
50x £23
100x £21
|
|
|
|
|
|
The M10 is a complete Quad-band GSM/GPRS solution in an SMD type which can be embedded in customer applications.
Detailed：
The M10 is a complete Quad-band GSM/GPRS solution in an SMD type which can be embedded in customer applications.Featuring an industry-standard interface,the M10 delivers GSM/GPRS 850/900/1800/1900MHz performance for voice,SMS, Data, and Fax in a small form factor and with low power consumption.With a tiny configuration of 29mm x 29mm x 3.6mm (the thickness of PCB is 1.6mm) , M10 can fit almost all the space requirements in your industrial application, such as M2M, Te-lemetry and other mobile data communication system.
·Quad - band GSM/GPRS module with a size of 29mmx29mmx3.6mm
·SMD type suit for customer application
·Embedded powerful TCP/IP protocol stack
·Based on mature and field-proven platform, backed up by our support service,from definition to design and production
General features:
·Quad-Band 850/ 900/ 1800/ 1900 MHz
·GPRS multi-slot class 12/10/8
·GPRS mobile station class B
·Compliant to GSM Class 4
·phase 2/2+ (2W @850/ 900 MHz) Class 1(1W @1800/1900MHz)
·Supply voltage range 3.4~4.5 V 4.0V nominal
·Low power consumption 1.1mA @ DRX=5 0.7mA @ DRX=9
·Operation temperature -45 °C to +85 °C
·Dimensions 29mm × 29mm × 3.6mm
·Weight Approx 8 g
·Control via AT commands (GSM 07.07 ,07.05 and other enhanced AT Commands)
·SIM application toolkit
Specifications for fax:
·Group 3, class 1
Interfaces:
·External SIM 3V/ 1.8V
·Analog audio interfaces Two channels
·RTC backup
·Keypad interface
·LCD interface
·Serial port and debug port
·Antenna pad
·Charge interface (Optional)
·GPIOs
|
|
|
|
|
|
