-
Siemens GSM module and industrial grade ARM processor embedded
-
Reliable performance with built-in 2 x watchdog
-
8 alarm digital inputs & 8 relay drivable outputs
-
4 Analog inputs, 0-53 mA, 10 precision
-
Alarm digital inputs accept dry contact up to 5 volts
-
Relay drivable outputs 12V-24V, drive electricity 0-0.2A
-
Each digital input can be assigned to one or more output relays
-
User-defined alarm content (default close or open)
-
Support up to 10 pre-set mobile numbers
-
Inquire digital input status by SMS
-
Password protected, prevent unauthorized accessing
-
Can be managed SMS or local PC
-
Automatic device condition report through SMS every 24 hour interval
-
Time stamped alarm message
-
Wide voltage range input, low power consumption design
-
Built-in TI TMP100 temperature sensor optional
-
Built-in buzzer alarm optional
-
Speak and MIC interface for speaking and voice monitoring
-
Built-in rechargeable battery optional with power cut off alarm
-
Bi-directional data transmission
-
4 Analog inputs, 0-53 mA, 10 precision (R1601)
-
Alarm and recovery SMS for each alarm point
-
GSM frequency 900/1800 or 850/900/1800/1900 MHz
-
Power adapter input: 100 to 240 VAC, 50 to 60 Hz
-
Power adapter output: 12 VDC, 1500 ma (6-28 VDC supported)
-
Antenna: 50 ohm SMA Antenna interface
-
SIM-card: Standard 3V SIM Card
-
Serial: RS-232C, default communication parameter 9600, n, 8, 0, 1
-
I/O interface: screw pluggable terminal block, pitch=3.81mm
-
Output drive voltage: Equal to input DC voltage
-
Output drive power: drive voltage Max. 35V, drive current Max. 200ma
-
On state input current: Max. 0.33ma
-
Input signal: Dry contact or 0V-3.3V level signal
-
Operating temperature: -10°to 70°C
-
Operating Humidity: 10% to 90%
-
Dimension (H x W x D): 110×54×25mm (R1600)
-
130×80×25mm (R1601)
-
Weight: 0.6KG
