GSM 021
|
|
Alarm and control system GSM 021 is used to inform a maximum of two users through the GSM network that an alarm has occurred. Users may also control one electrical device via their mobile phones, e.g. they may switch a lighting system on and off or open and close a gate.
GSM 021 may be connected to an intruder alarm control panel. It has two digital inputs (normally open), so that one detection device may be connected independently of the intruder alarm control panel, or alternatively two detection devices may be connected to GSM 021 without needing a control panel.
When a triggered zone is restored to pre-alarm, the system also sends an SMS or voice message confirming that this has been done.
Either user may turn the heating or lighting on or off, open gates, lift blinds etc. by sending GSM 021 a text message. Only one electrical device may be controlled in this way. The system remembers the status of output in the case of temporary electricity failures. The system will ignore requests and calls coming from unknown telephone numbers.
Features:
- 2 inputs
- 1 Open Collector output
- Audio call with text message
- Audio monitoring
|
|
| GSM Compact II |
|
This device allows quick upgrade of alarm panels or other
equipment or could be used stand alone in conjunction with a sensor,
relay or switch to send texts and voice calls when one of the inputs are
triggered.
When one of the inputs are triggered, the unit will
send out text messages 'Alarm 1 Activated' or 'Alarm 2 Activated' and
follow these with a voice call to the pre programmed numbers.
Each input allows 6 seconds of voice recording.
Features:
- 2 Inputs
- 2 Output relay
- Outputs controlled by call, text or input status
- Temperature probe input available
- 6 second pre-recorded voice
- SMS text messages per input
- Low power warning SMS / Call
- Support for monitoring station
- Status SMS
Brochure
|
|
|
|
|
|
This device offers allows quick upgrade of alarm
panels or other equipment and can even be used stand alone in
conjunction with a sensors, relays or switches to send texts and audio
monitoring, generating calls and SMS text messages when one of the inputs is triggered.
When one of the inputs are triggered, the unit will
send out text messages 'Alarm 1 Activated' or 'Alarm 2 Activated' and
follow these with an audio call to the pre programmed numbers.
Features:
- 5 inputs
- 1 output relay
- Pre-recorded call per input
- Audio call per input
- SMS Text messages per input
- Audio monitoring
- USB, SMS text and GPRS (webpage) configuration
|
|
|
|
|
|
This device offers allows quick upgrade of alarm
panels or other equipment and can even be used stand alone in
conjunction with a sensors, relays or switches to send texts and audio
monitoring, generating calls and SMS text messages when one of the inputs is triggered.
When one of the inputs are triggered, the unit will
send out text messages 'Alarm 1 Activated' or 'Alarm 2 Activated' and
follow these with an audio call to the pre programmed numbers.
Features:
- 5 inputs
- 2 output relays
- Pre-recorded call per input
- Audio call per input
- SMS text message per input
- Restore notification
- Audio monitoring
- USB, SMS text and GPRS (webpage) configuration
|
|
GSM EasyCON
|
|
|
We believe this is the worlds smallest SMS text / call GSM Dialler. Ideal for vending machines, driveway break-beam alerting or to be used in any equipment such as alarm or plant where remote notification is required.
Features:
- 2 contact inputs
- 1 OC output
- Forwarding SMS and voice message to 8 phone numbers
- Programming via SMS and PC
- Contact ID sending to the monitoring station
|
|
|
GSM ProCON
|
|
|
Features:
4 Contact inputs
1 NO/NC relay output
Forwarding SMS and voice message to 8 phone numbers
Programming via SMS and PC
ContactID sending to the monitoring station
Expand modules
|
|
|
| GSM CG5 |
|
|
GSM CG5 is a notifying device applied for transmitting text SMS about security system activating by immediately sending text SMS to 4 mobile phones if at least one its inputs has been triggered.
|
|
|
|
|
|
The PagerZ6 generates phone calls & SMS text message when inputs are triggered.
With
1 relay that can be controlled by the inputs and remotely via phone
call or text message and can be used in a number of ways.
As well as generating calls and / or SMS text messages when triggered, they also
have the facility of sending a further text and / or phone call should
the trigger reset or returned to normal.
Features:
- 6 inputs
- 1 Relay outputs
- 8 Second recording per input on trigger
- 8 second recording per input on restoration
- Text alarm per input when triggered or restored
- Support for monitoring station
- Status SMS
- GPRS version & server available
|
|
|
GSM-250a |
|
|
The 250a is a popular product to generate SMS text messages when its inputs are triggered.
4 inputs allow for a wide range of monitoring solutions and 4 digital outputs to drive relays and other connected equipment.
As well as generating a call and / orSMS text when triggered, they also
have the facility of sending a further text and / or phone call should
the trigger reset or returned to normal.
Features:
- 4 inputs
- 4 Digital outputs
- Text alarm per input when triggered & restored
- Support for monitoring station
- Status SMS
- GPRS version & server available
|
|
| GSM-250b |
|
|
The 250b generates SMS text messages when its inputs are triggered.
8 dry contact and 8 analogue inputs allow for a wide range of monitoring solutions as well as the 8 digital outputs which can be driven by the status of the inputs and by sending SMS text messages.
As well as generating a call and / or SMS text when triggered, they also
have the facility of sending a further text and / or phone call should
the trigger reset or returned to normal.
Features:
- 8 inputs
- 4 Analogue inputs
- 8 Digital outputs
- Text alarm per input when triggered & restored
- Support for monitoring station
- Status SMS
- GPRS version & server available
|
|
| GSM-CCU6225 |
|
|
|
Currently not available:
|
| GSM-CCU6225-LT |
|
|
|
Currently not available:
|
| GSM-CCU6225-LC |
|
|
|
Currently not available:
|
