GSM Alarm CG2 with Auto dialler & text notification

CG2 is a six input control panel with a GSM communicator available as bare PCB or as a full installation kit.

GPRS and/or SMS communication with a monitoring station

Event format corresponds to the Contact ID codes
Textual reports to up to 2 mobile phones by SMS messages are available
6 programmable inputs
3 ways to arm/disarm the security system
1+39 user codes to arm/disarm the security system
3 security modes ARM/STAY/OFF
Zone bypass
6 programmable outputs
Possibility to control an output by SMS or by a free-of-charge call
Internal pulse power supply unit
USB port for configuration

Applications

Protection of houses, apartaments, offices;
Remote control of heating, ventilation or lighting systems;
Remote control of electromagnetic door locks, automated gates, garage doors;
Temperature measurement.

Features

Communication protocol to CMS* receiver TCP/UDP and/or SMS
Addressing to CMS* receiver by 2 IP addresses
Addressing to CMS* receiver by 2 GSM numbers
Event format to CMS* receiver according to Contact ID codes
Event reporting to 2 mobile phones by text SMS messages
Operating frequency: 900/1800/1900 MHz
Power supply: 16-18 VAC
Current: up to 2 A
Back-up power supply source: battery 12 V, 4-7 Ah
Power supply for peripheral devices: 12 VDC, 1,1 A
Inputs IN1, ..., IN6: 6, set as NC, NO or EOL=2,2 kO type
Outputs PGM1, PGM2, PGM3: 3, OC type, switching 30 V, 50 mA
Outputs PGM4, PGM5: 2, OC type, switching 30 V, 1 A
Output PGM6: Relay output, switching 30 V, 1 A
Security system arm/disarm by keypad and/or Dial
User codes 1 + 39
Remote control of external outputs by SMS or Dial
Configuration directly by USB or remotely by SMS
Operating temperature: -10°C to +55°C
Dimensions: 120 x 80 x 16 mm
Weight: 0,1 kg

Datasheet