The module is controlled via telephonic call, control input and SMS. After changing of status of security sensors and connected devices, the module sends message via GPRS to the CMS* of security service and also sends SMS and calls to programmed telephone numbers.

Features of the unit:

• Security control panel of six zones for transferring messages to the CMS* via GPRS and/or SMS;
• Security control panel for individual security for transferring messages to a user in a form of SMS;
• Device of remote control for electrical engineering equipment.

Technical information:

• Power supply voltage: ~16 – 18 V AC
• Current:
  • In idle running 0,1 A max;
  • In transmission mode 0,4 A max (without additional loads).
• Backup battery: 12V, 4 - 7Ah, external;
• 6 inputs / zones;
• Installation methods (can be chosen by each zone):
  • NC;
  • NO;
  • EOL=2,2 kΩ type.
• Three controlled outputs PGM 1, 2, 3:
  • Type: open collector 30V 50mA.
• Two controlled outputs PGM 4, 5:
  • Type: open collector 30V 1,5A.
• Relay NO-C-NC output:
  • Type: up to 1A, under active load, U ≤ 30V.
• Power supply of additional receivers 12VDC, up to 1,6A;
• Number of entered telephone numbers up to 30;
• Number of CMS IP addresses up to 2;
• Number of CMS receiving SMS up to 2;
• GSM/GPRS modem frequencies: 900/1800/1900 MHz;
• Protocol of communication with CMS*: Contact ID;
• Temperature operating range: –20C to +55C;
• Overall dimensions: 120x80x16 mm.