Harsh-weather and shock resistant PCB design, remote engine cut, geofence, working with PC based software EX300 and EX1000 web based software. ( 2.2 x 5.2 x 7cm) With its compact and small size, easy hide and installation inside the vehicle. U-blox GPS module and Philip GPRS module.
1. Real time GPS report
- fixed time report
- Vehicle ID
- fixed time/distance report
- Mileage report
- Vehicle status report:
- Ignition on/off report
- Report upon request
- Intelligent vehicle moving report
- Intelligent vehicle stopping report
- Enforced GPRS report update
- Keep Alive GPRS connection
- GPS storage when GPRS disconnected,
and forward when connection regains.
- Back up positioning by GSM base station when
GPS is not available
- Support GPRS and SMS
2. Alarm & Alarm Report:
- Emergency report
- Car jacking alarm
- SOS Cry for help rescue report
- Automatical arming
- SIM card taking off alarm ( new )
- Main power disconnecting alarm
- Low voltage alarm
- Vehicle moving alarm in arming mode
- Geo-fencing alarm report
- GPS antenna cut report
- GPS antenna connect report
- Speeding report
- Geofence alarm report
3. Control:
- Immobilization of vehicle engine
- Position update
- Cut engine fuel
- Recover engine fuel
- Recover alarm
- Clear logged data
- Re-set tracker
4. Remote & Onside Setting:
- Set time interval
- Set distance report
- Set speed limit
- Set data logging time interval
- Data-log upload numbers
- Data-log time periodical upload
- Set Geofence
5. Alternative mobile phone tracking and control
6. Data logger ( 100, 000 waypoints)
7. Mileage calculation, traveling history data request.
8. Firmware upgrade by PC program
9. TCP / UDP; GPRS/SMS
Technical parameter
|
Item |
Technical parameter |
|
Working voltage |
8 ~ 36V/DC |
|
Power source anti- ties |
≥ 80V |
|
Working electric current |
Average 110mA @ DC 12V
Sleeping < 45mA @DC 12V |
|
Unit size |
2.2 x 5.2 x 7cm( H x W x L ) |
|
Net weight |
0.26kg ( Outer cover of Aluminium alloy ) |
|
Digital transmission Frequency |
Philip GSM: /900/1800MHz. |
|
GPS performance |
Tracks up to 16 satellite channels of GPS Position precision<15 meters CEP without SA Cold start time< 48 sec. Warm start time< 38 sec., average Hot start time: <8 seconds ,average |
|
|
|
Input port |
1 route low voltage check 0~1V/DC |
|
1 route ACC/Start check 7~60V/DC |
|
2 routes high voltage check 7~60V/DC
1 alarm positive input
1 alarm negative input
1 emergency button input
1 microphone plug |
|
Output port |
1 route relay control 500 mA @ DC 12V
1 RS232 data port for firmware upgrade and PC setup
1 data port for handset phone / MDT mobile display |
|
Power port |
+ 5V/DC, 500mA (max) power supply
Built in memory for 10,000 points data logging |
|
Antenna |
GPS SMA connection
- 26dB
Cable length 5meters |
|
GSM SMA connection
- 3dB
Cable length 3meters |
|
Working temperature |
-10 ℃ ~ + 70 ℃ |
|
Working humidity |
5% ~ 95% |
|
Store temperature |
-25 ℃ ~ + 85 ℃ |
|
Backup battery |
Nickel- hydrogen 4.8V/DC 800 mAh |
|
GPS dynamic Conditions: |
Altitude 18,000 meters (60,000 feet) max |
|
Velocity 515 meters / second (1000 knots) max |
|
Acceleration 4G , max |
|
GPRS feature |
2 Watts EGSM (GSM900 Class 4) |
|
1 Watt GSM1800 (DCS1800 Class 1) |
|
GPRS class 10 |
|
Audio support (with echo-cancellation and noise reduction) |
|
Data transfer modes: |
GPRS (TCP) |
|
SMS PDU (buffered with up to 4 positions per SMS) |